Home >

News

17May 2021

Construction Method Of Common Castables

The lining of large furnace is usually made of materials with light weight, high strength and good thermal insulation performance, which greatly reduces the weight of furnace lining. All the refrac...
14May 2021

The Basic Regulations Of Personnel And Machines And Tools For The Masonry Con...

1，The bricklaying of kiln body must be carried out by professional furnace building team. Untrained and unskilled furnace builders are not allowed to carry out bricklaying. 2，Construction shall be ...
13May 2021

The Basic Regulations Of Masonry Slurry For Lining Fire Brick Of Shaft Kiln

1，The fire resistance and chemical composition of the slurry used for masonry refractory products shall be compatible with the fire resistance and chemical composition of the refractory products us...
12May 2021

The Basic Regulations Of Lining Fire Brick Masonry Construction For Shaft Kiln

Basic regulations on masonry materials and materials ( 1) Refractory brick products should be inspected, stored and transported according to the current standards and technical conditions. The refr...
11May 2021

Several Common Refractory Bricks And Castables In Cement Kiln (二)

Magnesite spinel brick: cao-al2o3-fe2o3 system compound is formed with cement clinker in use. Fe2O3 component diffusion and expansion of reaction site can make kiln skin stable. Advantages: Fe2O3 h...
10May 2021

Several Common Refractory Bricks And Castables In Cement Kiln （一）

The common fire-resistant bricks in cement kilns are alkali resistant bricks with low temperature zone and silica brick in high temperature zone: the phenomenon of head bursting on the surface of f...
07May 2021

Ways To Improve The Service Life Of Refractory Castables For Aluminum Melting...

The way to improve the service life of refractory castables for aluminum melting furnace should be mainly aimed at the above three aspects 1，Increase the density of refractories and reduce the poro...
06May 2021

Cause Analysis Of Refractory Damage In Aluminum Melting Furnace

With the increasing application of aluminum products to various industries, a variety of aluminum melting furnace continues to large-scale development, but also put forward more stringent requireme...
24Apr 2021

Characteristics Of Carbon Arc Air Gouging

Carbon arc gouging is a kind of hot working technology, which uses the arc heat generated between the carbon rod and the workpiece to melt the metal, and at the same time uses compressed air to blo...
23Apr 2021

Introduction Of Carbon Arc Gouging

Carbon arc gouging is a method of using graphite rod or arc generated between carbon rod and workpiece to melt metal and blow it off with compressed air to process groove on metal surface. Carbon a...
22Apr 2021

Polycrystalline Mullite Fiber And Glassy Fiber Have Different Preparation Pro...

The polycrystalline mullite fiber and glass fiber have different preparation processes. They are prepared by chemical "colloid method", and are formulated according to the formation of si...
21Apr 2021

How To Choose Carburizer For Steelmaking?

In the whole process of smelting, due to poor adjustment or discharge and excessive carburization, sometimes the carbon content in the steel does not meet the expected requirements. At this time, i...

First 74 75 76 77 78 79 80 Last 77/91

News

Construction Method Of Common Castables

The Basic Regulations Of Personnel And Machines And Tools For The Masonry Con...

The Basic Regulations Of Masonry Slurry For Lining Fire Brick Of Shaft Kiln

The Basic Regulations Of Lining Fire Brick Masonry Construction For Shaft Kiln

Several Common Refractory Bricks And Castables In Cement Kiln (二)

Several Common Refractory Bricks And Castables In Cement Kiln （一）

Ways To Improve The Service Life Of Refractory Castables For Aluminum Melting...

Cause Analysis Of Refractory Damage In Aluminum Melting Furnace

Characteristics Of Carbon Arc Air Gouging

Introduction Of Carbon Arc Gouging

Polycrystalline Mullite Fiber And Glassy Fiber Have Different Preparation Pro...

How To Choose Carburizer For Steelmaking?