Magnesia carbon brick is composed of magnesia and carbon. Both raw materials have extremely high melting points and are mutually insoluble, so the brick features good resistance to melting. It adopts a composite structure: its main components are magnesia clinker with strong resistance to basic slag corrosion and carbon that is poorly wettable by molten slag, delivering excellent slag corrosion resistance. In particular, it offers outstanding resistance to molten slag penetration. Compared with traditional fired basic bricks, the penetration layer on this brick is much thinner.
Due to graphite's superior thermal shock resistance, this material inherits such favorable properties. It has high thermal conductivity, relatively low linear expansion coefficient and elastic modulus, as well as high hot strength. It can largely avoid structural damage and spalling caused by cracking during service. Besides the above advantages, it also boasts good hot creep resistance. Compared with other ceramic-bonded bricks,it show remarkably good anti-creep performance.
When applied to ladle furnaces and steel ladles, this type of brick are mainly used for freeboard and slag line zones. Subject to service conditions, the refractories for these positions must withstand high temperatures, thermal shock and mechanical wear from slag erosion. Magnesia-chrome refractories were previously adopted for these areas. However, their consumption has been cut down due to chromium-related environmental pollution, and magnesia carbon brick have become the preferred alternative nowadays.
Magnesia carbon brick in new ladles suffer severe damage during preheating. A loose decarburized layer of 30~60 mm in thickness may form. This layer will be washed away once molten steel is poured, bringing magnesia grains into the slag. Obviously, preventing carbon oxidation during preheating is one of the key measures to extend the service life of this type of brick at the ladle freeboard and slag line. Apart from adding composite antioxidants into the brick, the critical solution is to coat the brick surface with alkaline low-melting glassy phase liquid after lining construction. This protects the carbon inside this type of brick from burning out during ladle preheating.
Contact me:Email:wp@cnjingganrefractory.com/sdwenping@163.com
TEL: 86-0533-4188518 / FAX: 86-0533-4188518
Rose:+86-13275332819(wechat/whatsapp number)









