Acid resistant bricks are mainly used in highly corrosive environments such as chemical workshops, pickling tanks and sewage tanks. To purchase high-quality acid resistant bricks, we can judge their quality from three aspects: performance index test, visual inspection and working condition matching.
First, verify the core physical and chemical indicators, which determine the anti-corrosion service life. The first indicator to check is acid resistance. For premium-grade products, acid resistance ≥99.8%. Only bodies with high silica content can resist long-term erosion by sulfuric acid and hydrochloric acid. If the acid resistance is lower than 98%, the brick will quickly sand and powder when exposed to acid. The second indicator is water absorption. High-quality bricks have water absorption ≤0.5%. High-density sintering prevents acid liquid from penetrating into the brick body through capillary pores. For bricks with water absorption higher than 2%, acid liquid will gradually seep down and cause substrate corrosion and hollowing. Third, check the compressive strength. For factory floors where forklifts pass, compressive strength must be ≥100 MPa to avoid cracking under heavy load. For high-temperature working conditions, thermal stability also needs to be tested.
Second, judge the compactness of bricks directly by appearance and touch. First, inspect the brick surface. High-quality bricks feature flat and smooth surfaces, free of pinholes, melt holes, dark spots and through cracks. The cross-section is fine and uniform without loose pores. More pores mean easier penetration of acid liquid, which greatly shortens service life. Second, tap the brick and listen to the sound. A clear, crisp sound indicates a high degree of ceramization and dense body. A dull, muffled sound means insufficient sintering temperature and loose interior, which greatly weakens anti-corrosion performance. Third, compare the weight. For bricks of the same specification, the heavier the weight, the higher the density and the better the anti-permeation performance.
Third, select the proper brick type according to service conditions. Glazed acid resistant bricks have dense and smooth surfaces, suitable for lining pickling tanks and sewage tanks with superior anti-seepage performance. Unglazed plain bricks have higher hardness and better wear resistance, ideal for workshop floors with frequent forklift traffic. Choose first-grade high-density bricks for severely corrosive strong acid environments; second-grade bricks can be adopted for weakly corrosive floors. Reasonable selection by grade helps avoid unnecessary cost waste caused by overperformance.
Contact me:Email:wp@cnjingganrefractory.com/sdwenping@163.com
TEL: 86-0533-4188518 / FAX: 86-0533-4188518
Rose:+86-13275332819(wechat/whatsapp number)










