China Mullite silicon carbide brick for lime kiln Manufacturers Factory Suppliers
-
Mullite-SiC BrickMullite-SiC Brick makes full use of the good thermal shock resistance, wear resistance and high temperature stability of mullite and silicon carbide in the process of high temperature use, so thatAdd to Inquiry
-
1300 ℃ Cordierite Mullite Shed Board1300 ℃ cordierite mullite shed board is a high-temperature kiln furniture product. The product has high room temperature, high temperature strength and strong deformation resistance, but theAdd to Inquiry
-
High Alumina Cordierite BrickThe high alumina cordierite brick is produced by adding synthetic cordierite on the basis of the traditional high alumina brick production process. Its thermal shock resistance and stability areAdd to Inquiry
-
Andalusite Runner BrickAndalusite runner brick is better than clay runner brick and high alumina runner brick in terms of rapid cooling and heat resistance, resistance to molten steel, molten iron scouring and fractureAdd to Inquiry
-
Acid Resistant BrickThe acid resistant brick is white, also known as acid resistant ceramic tile. It is a ceramic bonded refractory brick. The product has good corrosion resistance to sulfuric acid and hydrochloricAdd to Inquiry
-
Mullite Checker Brick For Hot Blast FurnaceMullite Checker Brick is specially designed for regenerator of hot blast stove, and the products are divided into three grades:JM-65,JM-70,JM-80. The main raw material of the product is syntheticAdd to Inquiry
-
Sillimanite Bricks for Blast FurnaceThe product is dense sillimanite brick,Sillimanite Bricks for Blast Furnace has low thermal expansion rate, good thermal shock stability, good spalling resistance, low Fe2O3 content in raw materials,Add to Inquiry
-
Andalusite High Alumina Brick for Hot Blast StoveThe product is andalusite refractory brick,andalusite raw material has good thermal shock stability and high temperature resistance. The high alumina brick produced by andalusite has good spallingAdd to Inquiry
-
Mullite Brick for Hot Blast FurnaceThe main structure of Mullite Brick for Hot Blast Furnace is acicular and columnar mullite. the superior thermal shock stability and erosion resistance make the product have good serviceAdd to Inquiry
-
Sintered Zircon-corundum BrickSintered zirconia corundum brick is added with iron oxide in the corundum brick, which enhances the toughness of the original corundum brick, so that the sintered zirconia corundum brick has betterAdd to Inquiry
-
High Alumina Brick for Blast FurnaceHigh Alumina Brick for Blast Furnace is dense high alumina brick for blast furnace, with apparent porosity ≤ 19%, lower than that of ordinary high alumina brick 23-26%. It has higher compactness,Add to Inquiry
-
General High Alumina BrickGeneral High Alumina Brick is a kind of high alumina brick commonly used in industrial kilns. Its service temperature is in the range of 1300 ~ 1500 ℃. It is a high-quality refractory brick. TheAdd to Inquiry
Brief Introduction Silicamullite bricks is mainly designed for rotary kiln of cement industry Silicon mullite bricks by adopting high grade bauxite and SiC as raw material and special sintering...
Silica mullite brick is made of sintered bauxite and high dense SiC silicon carbide by process of pressing and firing at high temperature . Silica-mullite bricks are characterized by good...
Its characteristics are usually: it has benefit temp resistance of mullite, plus it has the benefits of wear resistance, rust resistance and good cold weather...
Clay-bonded silicon carbide bricks. Clay-bonded silicon carbide brick is made of coarse, medium and fine silicon carbide in accordance with the particle level ratio, first dry mixed evenly before...
7/26/2022 · The Main Application of Silicon Carbide Mullite Bricks in Cement Rotary Kiln. Silicon Carbide Mullite Brick is suitable for the transition zone, preheating zone, tertiary air duct, five...
Mullite silicon carbide bricks with andalusite for cement rotary kiln lower transition zone. 1. Good thermal conductivity 2. Good high temperature strength 3. Wear resistance and corrosion...
- Tel: +86-533-4188518
- Mob: +8613275332819
- E-mail: sdwenping@163.com
- Add: Room 711, NO.3, Yanhe Road, Boshan, Zibo, Shandong, China















