Silicon Brick

• 
  Pyrophyllite Bricks For Coke Ovens

  The pyrophyllite bricks used in coke ovens are divided into two types: grid bricks and solid bricks, with grades TR-65 and TR-70, which are two types with silicon dioxide content not less than 65%

  Add to Inquiry
• 
  Hot Blast Furnace Silica Brick

  Hot blast furnace silica brick is a siliceous refractory brick with the main crystalline phase of tridymite. It is used to build the high temperature part of the hot blast furnace. Under the

  Add to Inquiry
• 
  High Thermal Conductivity Silicon Brick

  Silicon brick with high thermal conductivity is a new type of energy-saving silicon brick, which is produced by adding high thermal conductivity raw materials in the production process of silicon

  Add to Inquiry
• 
  High Density Silicon Brick For Coke Oven

  Compared with traditional silica brick, high-density silica brick is more resistant to wear and erosion, lower apparent porosity, higher softening temperature under load. When it is used in coke oven

  Add to Inquiry
• 
  Impermeable Refractory Brick

  Impermeable refractory brick with SiO2≥70%, application as barrier layer of electrolytic aluminum cell，can effectively prevent the immersion and penetration of Na and NaF and prolong the service life

  Add to Inquiry
• 
  Pyrophyllite refractory brick for smelting furnace

  The main raw material of pyrophyllite refractory brick is pyrophyllite mineral material, in which the lower the content of Al2O3, the better, generally in 13-16%, the better use effect. In the

  Add to Inquiry
• 
  Semi-silica Brick

  Semi-silica Bricks are mainly used in the linling part of ladle,due to its character of micro expansion after fired

  Add to Inquiry
• 
  Penetration Resistance Silicon Brick

  The impermeable silica brick is mainly applied to the impermeable layer of electrolytic aluminum cell. In the process of use, it effectively prevents the further penetration of cryolite and protects

  Add to Inquiry
• 
  Dense Silica Brick

  Dense silica brick using optimizing raw material grain size distribution、optimize the organic binder and optimize the molding equipment production

  Add to Inquiry