Home >

News

29Sep 2025

The Application Of Stemming

The Application of Stemming Stemming is a refractory product used in blast furnace tapping ports and must have the following properties. 1. High temperature resistance. 2. Good plasticity and bondi...
23Sep 2025

The Introduction To Calcined Petroleum Coke

The introduction to Calcined Petroleum Coke Calcined petroleum coke is a carbon material made from petroleum coke and calcined at a high temperature of around 1300 ℃. Petroleum coke is a black or d...
26Sep 2025

Factors Affecting The Quality Of Silicon Nitride Bonded Silicon Carbide Brick...

4. The impact of drying system The temperature and time during the drying process have a significant impact on product quality. Too low a temperature or too short a time can result in residual mois...
25Sep 2025

Factors Affecting The Quality Of Silicon Nitride Bonded Silicon Carbide Brick...

Silicon nitride combined with silicon carbide brick is a new type of refractory material, which includes finer categories such as silicon nitride combined with silicon carbide radiation tube, silic...
24Sep 2025

What Are The Common Types Of Refractory Castables?

1. According to their chemical properties, they are divided into acid resistant castables, neutral castables, and alkali resistant castables. 2. According to the composition of the binder, it can b...
24Sep 2025

How To Determine If There Are Defects Inside Refractory Bricks

The quality of refractory bricks affects the normal operation of kilns. With the advancement and development of high-temperature industrial technology, the requirements for the quality of auxiliary...
23Sep 2025

The Demand For Refractory Materials in Traditional Rotary Kilns

The early traditional rotary kilns were wet kilns for slurry calcination and dry kilns for powder calcination, as well as waste heat boiler kilns, generally equipped with single cylinder and multi ...
19Sep 2025

What Is Light-burned Dolomite

Light-burned dolomite is a highly reactive mineral material produced by calcining dolomite at temperatures below 1000 °C. Its chemical composition is CaMg(CO₃)₂, and the mixture of calcium oxid...
18Sep 2025

The Application Of Aerogel Felt

The application of aerogel felt The main component of aerogel felt is nano silica. Its applicable temperature range is -200 ℃~1000 ℃. The aerogel felt is mainly used in industrial pipelines, storag...
18Sep 2025

The Introduction And Application Of Magnesia Spinel Bricks

1. The introduction of magnesia spinel bricks Magnesia spinel bricks are mainly made from high-purity magnesia sand and raw materials containing alumina. After mixing, forming, and a high-temperatu...
17Sep 2025

Application Of Manganese Sand Filter material

The Application of Manganese Sand Filter material Manganese sand filter material is a kind of filter material that is widely used in the field of water treatment. It is primarily composed of MnO₂ (...
16Sep 2025

The Application Of Silica Bricks

The Application of Silica Bricks The production of silica bricks primarily uses bauxite clinker and silicon carbide as raw materials. Through precise control of firing temperature and atmosphere, i...

First 4 5 6 7 8 9 10 Last 7/79

News

The Application Of Stemming

The Introduction To Calcined Petroleum Coke

Factors Affecting The Quality Of Silicon Nitride Bonded Silicon Carbide Brick...

Factors Affecting The Quality Of Silicon Nitride Bonded Silicon Carbide Brick...

What Are The Common Types Of Refractory Castables?

How To Determine If There Are Defects Inside Refractory Bricks

The Demand For Refractory Materials in Traditional Rotary Kilns

What Is Light-burned Dolomite

The Application Of Aerogel Felt

The Introduction And Application Of Magnesia Spinel Bricks

Application Of Manganese Sand Filter material

The Application Of Silica Bricks