Key points in the production of fused cast mullite bricks:
1. Raw materials: industrial zirconia powder or high alumina bauxite, quartz sand, high-quality clay, bauxite should be pre fired at about 1000 ℃ to remove structural water.
2. Batching: When batching, the Al2O3/SIO2 ratio is generally about 2.50. Reducing agents, such as charcoal or fine crystal coke, should also be added to the batching. The amount should not be too much, otherwise, SIO2 will be reduced more, affecting the amount of mullite crystals in the product. Add 5-10% sawdust to remove the gas generated in the melting process.
3. Melting: Melting in electric arc furnace at 1900-2200 ℃ in reducing atmosphere
4. Casting and annealing: inject the solution into the model, and after cooling, it will become a product with dense structure and uniform structure
5. Heat treatment: the castings after heat treatment shall have sufficient strength without excessive internal stress. The heat treatment is divided into two stages: crystallization and annealing
6. Mechanical processing: because the model shape is not accurate enough, the upper and lower shrinkage is inconsistent, resulting in shrinkage cavity, casting mouth and surface wrinkles, which need to be processed before use
Properties of fused cast mullite bricks

Contact me:
Email:wp@cnjingganrefractory.com/sdwenping@163.com
TEL: 86-0533-4188518 / FAX: 86-0533-4188518
Rose:+86-13275332819(wechat/whatsapp number)









