(1) Building roof insulation
Foam glass is used in building roof insulation structure There are three main forms: upright roof, inverted roof, inclined roof. The inverted roof can be used for greening, planting flowers and plants; or for roof sports fields and other uses. Foam glass and other inorganic materials are easy to mix, easy to construct, and have good waterproof, fireproof and thermal insulation effects.
Architecture
(2) Building exterior wall insulation
Foam glass as a wall insulation material can effectively reduce the thickness of the wall, reduce the weight of the building structure, and expand the area of use. For the external wall insulation structure using foam glass, during construction, first, use the foam glass special polymer mortar to paste the foam glass on the outer wall leveling layer; secondly, apply the thermal insulation foam glass special anti-cracking mortar to the foam glass surface.
(3) Foam glass external wall insulation and construction technology
The external insulation technology of the foam glass exterior wall uses a special adhesive to bond the foam glass to the base wall, the surface layer is leveled with anti-cracking thermal insulation slurry, and the decorative layer is decorated with paint or bricks to improve the overall performance. The fire protection performance and thermal insulation performance of the building envelope, especially for high-rise residential buildings and public buildings with high fire rating requirements, this technical system has further proved its practical application significance.
Foam glass exterior wall external insulation technology construction system is composed of foam glass adhesive layer, foam glass insulation layer, anti-crack mortar leveling layer, alkali-resistant glass fiber mesh cloth or four-angle steel wire mesh anti-crack mortar insulation layer, and decorative layer, According to our company's analysis of test verification and actual application, before using this technical system to carry out thermal insulation construction, there are special requirements for the flatness and verticality of the base wall, which should meet the requirements of the national wall structure acceptance scale As a basis, to eliminate the possibility of gaps between the system material and the base wall, improve the safety factor, the base wall that fails to meet the above flatness and verticality requirements should first be leveled with 1:3 cement mortar, and then Foam glass paste construction.
