Our company insists on the objective, practical and pragmatic attitude, constantly absorbing productivity, technology and seriously researching and developing various Silicon carbide ceramic roller bar for ceramic tile factory, Dry-type castable for heating furnace, Ramming mass for iron removal ditch. We actively promote energy conservation, emission reduction, product upgrading and structural adjustment. We are people-oriented, give full play to each employee's subjective initiative, and constantly improve the execution. We continue to promote the integration of sustainable development into our corporate strategic planning and business operations, as part of our philosophy of responsibility. Our company adheres to the principle of 'winning by quality and operating with integrity', and strives to provide satisfactory and assured products for domestic and foreign users.
1,Description of Magnesia Carbon Brick For Converter:
This product selected high purity fused magnesia sand as material, and molded by high pressure and sintered by high temperature. Consequently, this product has good compactness, and its bulk density is more than 2.9g/cm3.It also has good performance of alkali resistance, corrosion resistance, abrasion resistance and high-temperature resistance.
With high purity fused, dead-burned magnesite and crystalline graphite by high pressure molding machine production magnesia carbon brick,with low porosity, good compactness, oxidation resistance, slag corrosion resistance, spalling resistance etc. excellent performance, in converter, electric furnace and ladle refining furnace to obtain the very good use
2,Index of Magnesia Carbon Brick For Converter：
Item | JMT-10 | JMT-14 | JMT-18 |
MgO % | >80 | >76 | >72 |
C% | 10 | 14 | 18 |
Apparent Porosity % | ≤4 | ≤4 | ≤3 |
Bulk density g/cm3 | >2.90 | >2.90 | >2.90 |
Cold crushing strength Mpa | >40 | >40 | >40 |
High timperture bending strength 1400°C*30min,Mpa | >6 | >14 | >12 |
3,Features of Magnesia Carbon Brick For Converter: Our magnesia-carbon brick are made of high-purity fused magnesia (Mgo≥96%) and high-grade graphite powder, with the addition of metal aluminum metal and metal silicon as antioxidants as the main raw materials.especially the resin binder, we choose the environment-friendly alcohol-based resin, the baking temperature is raised to 270-300 degrees Celsius.In this way, the product after masonry, drying process, basically ensure that the surrounding environment is not polluted, do not produce harmful odor, so that the human body is not damaged, which is very important and favored by users.
4,After many tests, inspect and free use by users, our company and factory have worked out a complete set of scientific production technology, so that the quality of products, especially the porosity, density, strength, environmental protection and use effect of products are superior toa those of traditional magnesia-carbon bricks product.Welcome new and old users to negotiate, visit and strengthen cooperation.
5,Our advantages in producing magnesia carbon bricks: the magnesia carbon bricks used in converter and ladle produced by our factory are different from the traditional magnesia carbon brick products. The biggest difference is that:
1) The environment-friendly alcohol based resin binder is used. The porosity of the product is lower than that of the traditional product, the standard value is ≤ 4%, the measured value is 3.2-3.5%, and the compressive strength is higher than that of the traditional product, the standard value is ≥ 40MPa, the measured value is 45-65mpa. Therefore, the product has better compactness, better slag resistance and more heats.
2) Using 280-320 ℃ high temperature baking, the product is non-toxic and tasteless in the process of heating up, and has little harm to the surrounding environment and human body, which meets the requirements of environmental protection products. In addition, our factory production technology is very perfect, molding equipment is large and advanced, laboratory testing equipment is complete, fully guarantee the quality requirements of the product, at present, the product in domestic and foreign users get good evaluation, the use effect is better than traditional products
6.Good feedback of product use effect,the products have been exported to South Korea, Japan, Pakistan, Russia, Australia, Oman, the United States, Kenya, Mexico, Morocco and India.
7.The manufacturer is a professional manufacturer and can provide complete product index test reports or third-party test reports.
Do you want to find a professional supplier of refractory products?
Do you want to find a stable and credible supplier?
Then please contact with us
Contact me:
Email:wp@cnjingganrefractory.com/sdwenping@163.com
TEL: 86-0533-4188518 / FAX: 86-0533-4188518
Rose:+86-13275332819(wechat/whatsapp number)
With flexible configurations and product options, we can meet customers' needs when it comes to Fused Magnesite for Kiln Fire Resistant Furnace Slag Line Fire Magnesia Carbon Bricks. We will keep working hard and offering you the highest-quality products and service. In recent years, our company has continued to actively research and develop, expand the scope of production, and expand various sales channels abroad.
Hot Tags: magnesia carbon brick for converter, China, manufacturers, suppliers, factory, use, property, Carbon Brick, Refractory brick for lime kiln, Zirconia nozzle brick for steelmaking, Chromic quality refractory brick production plant, Heat Preservation Covering Agent, Textile fiber structure cement blanket
