EPS Sandwich Panel for Clean Room

EPS Sandwich Panel for Clean Room

1.Description: magnesium oxysulfide plate is a new type of plate made of magnesium oxide and magnesium sulfate as basic materials, alkali resistant glass fiber mesh as reinforcement materials, A new type of board is made by adding inorganic polymerized rock liquid and flexible plant fiber, The...
Send Inquiry
Chat Now
Description

We have the solid technical strength, and will take it as a new starting point, continue to devote to research and development of Ceramic regenerator block with 25*25 hole, Supplier of alumina insulating refractory brick, Ceramic roller bar with working temperature of 1380 ? and improvement. We offer personalized solutions that give you plenty of choices. You are welcomed to visit our company at any time. High grade, low price and excellent service are the management strategies of our company. We always insist on customers regardless of size, we treat product quality and service quality equally. We are ready to face the worries and make the improve to understand all the possibilities in international trade.

1.Description: magnesium oxysulfide plate is a new type of plate made of magnesium oxide and magnesium sulfate as basic materials, alkali resistant glass fiber mesh as reinforcement materials, A new type of board is made by adding inorganic polymerized rock liquid and flexible plant fiber, The product is fireproof, waterproof, tasteless, non-toxic, non freezing, non rotten, non deformed, non combustible, light in quality, high in strength, non hygroscopic, non corrosive to steel bars and convenient for construction , long service life.

2. characteristics

1) Air hardness: the product is air hardening cementitious material, which does not harden in water

2) Multicomponent: the main components are light burning powder and magnesium sulfate. Other components include water, modifier, filler, etc

3) No corrosion to steel: the product uses magnesium sulfate as the blending agent, without chloride ion, and no corrosion to steel

4) High strength: compressive strength reaches 60MPa, flexural strength reaches 9Mpa

5) Air stability and weather resistance: the product is air hardening cementitious material. The drier the air is, the more stable it will be. The results show that the compressive strength and flexural strength of the product in dry air increase with age and are very stable

6) Low burning rate and low corrosiveness: the pH value of the product is 8-9.5, which is close to neutral and has little corrosiveness to glass fiber and wood fiber

7) Low density and light weight: the product density is generally 1600 ~ 1800kg / m3, about 70% of the cement products.

8) Fire performance: the fire resistance time of 50mm thick products is ≥ 1H, that of 75mm thick products is ≥ 2h, that of 100mm thick products is ≥ 3h, and the fire rating is A1.

9) Waterproof and dampproof: the hydrophobic rate of the product is ≥ 98%, without deformation and chemical reaction in case of water, which is applicable to the water plant project

10) Thermal insulation and sound insulation: the thermal conductivity is 0.055w/m.k, and the sound insulation is 32dB, which is a good sound insulation material

11) Green environmental protection: the product does not contain asbestos, formaldehyde, non-toxic, tasteless and pollution-free

3.Product specification:Effective width1150mm,thicness:50-200mm, Length can be produced according to user's requirements

4.Main performance parameters of the product

Item

Unit

Technica index

Fire resistance


A1 Grade

Thermal conductivity

w/m.k

0.055

Density

g/cm3

0.95-1.05

Hydrophobicity

%

≥98

Compressive strength

Mpa

≥60

Flexural strength

Mpa

≥9

Sound insulation

db

≥32

Safety and environmental   protection


Asbestos free, formaldehyde   free, non-toxic, tasteless

5,Packing:Waterproof, moisture-proof and convenient for transportation. See attached drawings

包装

6,Application: it can be used as wall board, fire-proof board, etc., for interior decoration, wet environment, underwater engineering project, see application drawing photo

11

22

7, Product display

1  2  3

8, Product delivery scenario

场景图

9.Good feedback of product use effect,the products have been exported to  Japan,Russia,Oman

10.We are a professional supplier, who can provide customers with free product technology, use and other issues.



Do you want to find a professional supplier of Sulfide Magnesium Board products?


Do you want to find a stable and credible supplier?


Then please contact with us


Contact me:

Email:wp@cnjingganrefractory.com/sdwenping@163.com

TEL: 86-0533-4188518 / FAX: 86-0533-4188518 

Rose:+86-13275332819(wechat/whatsapp number)


With the advent of the global economy, we look to the world and strive for excellence to provide glass products to meet the needs of different customers.Strong R&D strength, excellent product quality, good social reputation, and meticulous internal management have made us a leader in the EPS Sandwich Panel for Clean Room industry. According to the national economic development and the adjustment of the industrial structure, we gradually establish a scientific outlook on development. We seek development by technology, serialization and diversification of products.

Hot Tags: sulfide magnesium board, China, manufacturers, suppliers, factory, use, property, Light weight clay brick production plant, Ceramic ball with 80 Al2O3, F2 4m coal gass producer, Ceramic grinding balls for cement industry, Using temperature 1400 high alumina brick, Magnesia iron alumina spinel refractory brick production plant

Send Inquiry
Contact Us
  • Tel: +86-533-4188518
  • Mob: +8613275332819
  • E-mail: sdwenping@163.com
  • Add: Room 711, NO.3, Yanhe Road, Boshan, Zibo, Shandong, China