China Ceramic foam for aluminum liquid filtration Manufacturers Factory Suppliers
-
Alumina Foam Ceramic Filter For Cast AluminiumAlumina Foam Ceramic Filter is suitable for filtration and purification of aluminum and non-ferrous alloy liquid. When the temperature is greater than 1150 degrees Celsius, the alumina foam ceramicAdd to Inquiry
-
Zirconia Foam Ceramic FilterZirconia Foam Ceramic Filter is a three-dimensional network structure, with the maximum service temperature of 1760 ℃, which can filter out the micron level slag, improve the surface hardness,Add to Inquiry
-
Mullite-corundum Honeycomb CeramicMullite-corundum Faveolate Ceramic is made of fused corundum and fused mullite as the main materials, adding active micro powder and firing at high temperature. High temperature resistance, corrosionAdd to Inquiry
-
Mullite-cordierite Honeycomb CeramicThe main raw materials of Mullite-cordierite Honeycomb Ceramic are synthetic mullite and synthetic cordierite, which make use of the advantages of mullite and cordierite, making the product'sAdd to Inquiry
-
Zircon Corundum Honeycomb CeramicZircon Corundum Honeycomb Ceramic is made of fused white corundum powder and zirconia powder as the main raw material. It has high temperature resistance, erosion resistance, good thermal shockAdd to Inquiry
-
Chrome Corundum Honeycomb CeramicChrome Corundum Honeycomb Ceramic is mainly made of chromium oxide powder and fused corundum sand, with large specific surface area, fast heat conduction, high compressive strength, low thermalAdd to Inquiry
-
Cordierite Honeycomb CeramicCordierite Honeycomb Ceramic is mainly composed of synthetic cordierite, binder and sintering agent, and is fired at 1280-1320 ℃.Cordierite Honeycomb Ceramic is the key product of regenerative highAdd to Inquiry
-
Magnesium Oxide Foam Ceramic FilterMagnesium Oxide Foam Ceramic Filter is porous, honeycomb, with three-dimensional network framework and through pores, with high porosity, small resistance, high strength, high temperature resistance,Add to Inquiry
-
Silicon Carbide Foam Ceramic FilterSilicon Carbide Foam Ceramic Filter is commonly used in foundry, which can keep the consistency of molten iron flow, reduce the generation of bubbles and improve the yield of casting products. TheAdd to Inquiry
Foam Ceramic Filter. Foam ceramic is a porous ceramic product with a porosity of up to 80-90% and a volume density of only 0.3-0.6g/cm3, which has a unique three-dimensional network...
They are useful in aluminium gravity casting (permanent mould), pressure die casting, low-pressure, squeeze cast, and high-performance sand foundries to remove inclusions. Machined to tight...
PLATE-TYPE FILTERING UNIT; Filter&purification series. CERAMIC FOAM FILTER -PAL; CERAMIC FOAM FILTER-PZR; Launder series. INTEGRATED LAUNDER; LAUNDER DAM...
Ceramic Foam Filter For Liquid Aluminum is the most widely used filter in the area of aluminum melt filtration. The advantage is high filtration efficiency....
Sep 11, 2020 · The main advantage of the ceramic foam filtersystem is that the slag inclusion generated in the process of injection outside the furnace can be effectively eliminated through...
Application of Ceramic Foam Filters Decontaminated the molten metal liquid Simplified gating system Improve the metallurgical structure of the castings Reduce slag inclusions of the castings Increase...
- Tel: +86-533-4188518
- Mob: +8613275332819
- E-mail: sdwenping@163.com
- Add: Room 711, NO.3, Yanhe Road, Boshan, Zibo, Shandong, China











