Fiber reinforced calcium silicate board is a typical decoration fiber reinforced calcium silicate board, which is manufactured by special technology. With silicon and calcium as the main materials, calcium silicate board with mullite (c5s6h5) crystal structure is produced by rolling and pressing exquisite technology, autoclaving curing and surface polishing. The decorative board produced by high temperature and high pressure steam curing and drying treatment has the excellent characteristics of light weight, high strength, fire prevention, smoke-free, waterproof, mildew proof, moisture-proof, sound insulation, heat insulation, no deformation and no fracture. It can be used in interior wall panel, external wall panel, ceiling board, curtain wall lining plate, composite wall panel, insulation material, roof laying and other parts of the building. It is widely used in high-end office buildings, shopping malls, restaurants, cinemas and public places, such as partition walls, plastering parapets, ceiling and other decoration.
brief introduction
Fiber reinforced calcium silicate board is a new type of light board made of calcium material, siliceous material and other cementitious materials, as well as reinforced fiber (cellulose fiber, alkali resistant glass fiber, etc. instead of asbestos fiber) by molding, steam or high pressure steam curing.
A brief history of folding editing
In the 1920s, the common calcium silicate board was invented and developed in the United States in the early 1940s and 1950s. Fiber reinforced calcium silicate board was successfully developed in China in the early 1980s, entered the development stage in the mid-1980s and developed in the 1990s. At present, there are more than 20 major manufacturers with an annual production capacity of 40 million square meters.
