The sound and prestige of the ceramic anti-static floor used in the machine room and monitoring room are growing, and more and more manufacturers produce various anti-static floors. In the early stage of purchase, special personnel should be involved to select durable and long-lived floor products. Although there is a large elastic space on the anti-static ceramic floor equipment, it is also necessary to follow the equipment specifications to avoid the trouble caused by disassembly work for subsequent safety. The following anti-static floor manufacturers will tell you how to extend the life of the ceramic anti-static floor, and what are the precautions for the ceramic anti-static floor used in the monitoring room?
1,Many construction units know that there are requirements for the environmental temperature and humidity of the The planning shall follow relevant regulations to avoid electrostatic failure caused by too high or too low room temperature.
2, Block washing
In principle, the anti-static floor manufacturers are not allowed to wash the high-quality and reliable anti-static ceramic floor with a lot of clean water in general. For daily cleaning, some monotonous things can be selected as appropriate for cleaning, but assuming that the stains that are hard to clean can be soaked and dried by the mop and then cleaned. The reason why many clean water can not be used is to avoid washing The metal support rusted in water.
3,Block direct sunlight
Some large-scale multimedia classrooms are difficult to completely block the sunlight, but the monitoring room is obviously more severe. Because there are many electronic devices in the monitoring room, it can be avoided from direct sunlight in the structure, and the anti-static ceramic floor with guaranteed quality should also be prevented from continuous rain, because the above two points will cause the surface of the anti-static floor to peel, and after durability It will form peeling, not only affect the beauty but also affect the effect.
