Home > Knowledge > Content

What is the cause of corrosion of high alumina refractory bricks?

Aug 21, 2020

     The first type is called thermal and mechanical peeling, which is caused by irregular cracks of the refractory lining caused by the thermal and mechanical stress of the furnace, which leads to the rapid damage of the high alumina refractory brick lining.

     The second type is called structural spalling. It is caused by the infiltration of slag and the temperature fluctuations on the heating surface to change the structure, thus forming a unique metamorphic structure layer, which is parallel to the heating surface at the interface between the original layer and the metamorphic layer. Cracks, and then the high-alumina refractory brick lining peeled off and damaged.

    The third type is called melt flow, which is the melt flow or wear caused by the reaction with molten steel, molten iron and molten slag to produce substances with lower melting points, mainly due to the surface erosion caused by the generation of liquid phase.

    In addition, the cracks of the overall lining caused by the shrinkage of the high alumina brick lining and the expansion or opening of the joints of the brick lining caused by the shrinkage of the refractory products during use also cause the lining to be locally fast The main reason for the damage.


Send Inquiry