1. Ordinary high alumina brick
The main mineral components of this refractory brick are aragonite, corundum, and glass phase. As the Al2O3 content in the product increases, mullite and corundum also increase, and the glass phase decreases accordingly. The refractoriness and high-temperature performance of the product also improve accordingly.
2. High load soft high alumina brick
Compared with ordinary high alumina bricks, high load soft high alumina bricks differ in the matrix and binder parts:
3. Low creep high alumina brick
Improving the creep resistance of high alumina bricks through the use of so-called unbalanced reactions. According to the operating temperature of the kiln, three stone minerals, activated alumina, etc. are added to the matrix to make the composition of the matrix close to or completely composed of mullite,
4. Phosphate bonded high alumina brick
Phosphate bonded high alumina bricks are chemical bonded refractory bricks made from dense special grade or first-class high alumina bauxite clinker as the main raw material, phosphate solution or aluminum phosphate solution as the binder, semi dry press molding, and heat treatment at 400-600 ℃. It belongs to non fired bricks. In order to avoid significant shrinkage of the product during use, heating expansion materials such as bluestone and silica are generally introduced into the ingredients.
5. Micro expanded high alumina brick
The main material of this brick is high alumina bauxite, with the addition of three stones of concentrate, produced according to the production process of high alumina bricks.
Contact me:
Email:wp@cnjingganrefractory.com/sdwenping@163.com
TEL: 86-0533-4188518 / FAX: 86-0533-4188518
Rose:+86-13275332819(wechat/whatsapp number)
